Setting Up A Digital Temperature Controller

Setting up a thermostatic temperature controller is a straightforward process, but it is important to refer to the enclosed manufacturer's instructions to ensure proper installation. The specific steps for setting up a thermostatic temperature controller may vary depending on the manufacturer and model, but the following are general guidelines that can be applied to most controllers.

1. Choose the appropriate location for the temperature sensor. The temperature sensor should be placed in a location that accurately represents the temperature of the system or process being controlled. For example, in an HVAC system, the sensor should be placed in a location that is representative of the average temperature of the space being heated or cooled.
2. Install the temperature controller according to the manufacturer's instructions. This may involve wiring the controller to the heating or cooling system and mounting the controller in an appropriate location.
3. Set the desired temperature set point. The set point is the temperature at which the controller will maintain the system or process. This should be set based on the requirements of the specific application. For example, in an HVAC system, the set point may be set to maintain a comfortable temperature range for occupants.
4. Set the hysteresis parameter. The hysteresis parameter is the range of temperatures within which the controller will maintain the system or process temperature. For example, if the set point is 22 degrees Celsius and the hysteresis parameter is set to 2C the controller will turn on the heating system when the temperature falls below 20C and turn it off when the temperature rises above 22C. This helps to prevent the system or process from constantly turning on and off as the temperature fluctuates around the set point.
5. Calibrate the temperature controller. Depending on the model, the controller may need to be calibrated to ensure accurate temperature control. This may involve adjusting the temperature offset or other settings on the controller.
6. Test the temperature controller. After installation and calibration, the temperature controller should be tested to ensure that it is maintaining the desired temperature range and responding appropriately to changes in temperature.

It is important to note that the specific steps for setting up a thermostatic temperature controller may vary depending on the application and the controller model. It is recommended to carefully read and follow the manufacturer's instructions for the specific controller being used to ensure proper operation and accuracy.

Digital Temperature Controller UK

Our digital thermostats from Novus Automation and Ageon offer an excellent alternative to the following brands:

Omron, Schneider, LAE, Eurotherm, ABB, Tempatron, West Instruments, Jumo, Eliwell, Tecnologic

They are available with a variety of sensor inputs types such as NTC, PT100 and Thermocouple. The supply voltage range is typically chosen at the time of purchase with options such as 12-24V or 100-240V.