Novus Configuration Software
Novus Automation QuickTune
Most Novus PID or thermostatic controllers can be programmed from the front panel using the P key. Please consult the manual.
Software such as QuickTune supplements the onboard programming capacity with graphical PC based parameter setup. QuickTune can also save time if you have multiple devices to program. Once the setup file has been established it can be sent to other devices in seconds using batch programming.
Bluetooth enabled controllers such as N20K48 can now be programmed using the Smartphone App. QuickTune Mobile is available for Android and Apple devices and can be downloaded free of charge from the relevant store.
Novus Automation TxConfig II / SigNow
Prior to the release of SigNow, temperature transmitters were generally programmed using TxConfig (wired to device) or TxConfig II (USB to device). If your device has a built in USB port it is likely to work with TxConfig II. The main reason for configuring temperature transmitters is to establish scaling and calibration.
SigNow is the latest configuration tool from Novus which is backwards compatible with many devices. SigNow is available for PC/Laptop and Smartphone.
Novus Automation Nxperience Software
Nxperience is used for initial configuration of Portable dataloggers, DigiRail modules and some transmitters such as the RHT series.
It can also be used to monitor, download logs and produce reports for devices such as the LogBox WiFi and BLE.
Connections can be established using USB, Ethernet, WiFi and RS485.
Novus Automation FieldLogger Configurator
FieldLogger dataloggers have their own dedicated configuration software which offers simple step-by-step parameter setting on a PC/Laptop.
Please see below for a guide to the current configuration cables and required software:
Novus Guide To Software Configurators Download
Novus Automation Software Downloads
The link below will take you to the main Novus Automation Website where you can view and download the relevant software: