Sales & Technical Support: Mon–Fri 09:00–17:00 +44 (0)1824 520565

Collection: Foot, Limit & Micro Switches

Footswitches For Industrial Applications

We stock and recommend the EMAS PDK Series of footswitches. They offer a metal protective guard to avoid accidental operation and damage from mechanical shocks. This range comes with different contact configurations and operating mechanisms.

Limit And Micro Switches For Industrial Controls And Machinery

EMAS manufacture a huge selection of long lasting Limit and Micro Switches with a typical mechanical life of at least 10 million cycles. They can be used as an economical alternative for many 'Big Brand' Limit and Micro switches without compromise.

What Is The Difference Between A Limit And Micro Switch?

We normally consider a Limit Switch to be an industrial product in a housing. They are larger than a microswitch and can be found on machines and production lines where greater forces are anticipated. Microswitches by comparison are smaller and may have more subcomponents exposed, such as the electrical terminals and some parts of the operating mechanism. Microswitches are normally housed inside another part or enclosure whereas limit switches can usually be mounted as a standalone component.

Where Are Limit Switches Used In Industry?

Limit switches are commonly used to detect presence of objects and end of movement. Our EMAS Limit Switches are an industrial product suitable for repeated operation in factory automation and OEM machinery. We offer the metal body type which gives a greater level of mechanical protection. Our L51 limit switches accept standard cable glands, and the L61 range is supplied pre-wired and sealed, so the internal wiring is protected from dust and liquid ingress in both cases.

EMAS L51 vs L61 Limit Switches: Which Should I Choose?

Both ranges are metal-bodied, snap-action limit switches with 1NO+1NC contacts, a 3A (240V AC, AC15) rating, 10 million mechanical operations and an operating range of -25 to +80 °C. The difference is in how they are sealed and connected.

L51 Series L61 Series
Protection IP65 (dust-tight, low-pressure water jets) IP67 (dust-tight, temporary immersion)
Connection Internal screw terminals, 1-2.5mm² wire Pre-wired 2m cable, no terminal wiring
Cable entry One PG13.5 or M20x1.5 gland entry (gland not included) Factory-fitted cable
Best for Panels and machines where you run your own cable and may want to rewire or replace the contact block Wash-down, outdoor and hard-to-reach positions where a sealed, ready-wired switch saves installation time

Choose the L51 for general machine building, conveyors and OEM equipment where the switch is wired into your own cable run. It also offers the widest choice of actuators.

Choose the L61 for food and beverage wash-down areas, cold rooms, outdoor equipment, or anywhere water and dust are a concern and you want to connect the switch into a junction box without opening it.

L51 range: L51K13PUM211 (10mm metal plunger) · L51K13MIM311 (14mm metal roller lever) · L51K13MEM121 (18mm metal roller arm) · L51K13MEL121 (50mm rubber roller arm) · L51K13ROP101 (9mm plastic rod lever) · L51K13SOM101 (2mm metal spike spring lever) · L51K13SOM102 (7mm metal blunt spring lever)

L61 range: L61K13PUM211 (8mm metal plunger) · L61K13MUM331 (13mm metal roller plunger) · L61K13MEM121 (18mm metal roller arm) · L61K13MEP121 (18mm plastic roller arm)

How To Choose A Microswitch

When choosing a microswitch it is important to consider the actuator type. This is the mechanism that operates the electrical contacts. Common actuators include lever, plunger, roller and button. It is important to consider the range of motion and force required to operate the switch.

Another important factor is the voltage and current ratings. Many low priced microswitches are not rated to 240V AC and only switch small currents. Our EMAS products are rated to 250V and 10A AC1.

EMAS microswitches are available in many different formats. For greater versatility we offer the changeover contact as standard which allows the switch to be wired for normally closed or normally open. Micro switches are compact, allowing installation in enclosed spaces. As such they can be found in the smallest of handheld devices. For example, as part of trigger mechanisms.

Need Something Different? Thousands Of Electromechanical Products Available Next Day.

View The Full EMAS Catalogue To Learn More... EMAS Catalogue (.pdf)

You May Also Need

See our Switches & Pushbuttons and Safety Products.

25 products