LoopView is a fast upgrade for basic transducers, giving a local readout of process value with built-in scaling and alarms — ultra simple to install, and works with the NP640 and similar devices. It's a two-wire 4-20 mA loop indicator that can display measurements like pressure, differential pressure, flow, pH, temperature, acceleration and more, with a valve-type connector to standard EN 175301-803 (old DIN 43650 form A), available male and female.
LoopView is powered by the current loop itself, so it can be inserted into sensors already installed in industrial facilities using the same connector type. It has a 4-digit display and 2 keys, allowing quick and easy adjustment of indication value and range, decimal point position, digital signal filtering, and user calibration.
Parameter changes are password protected and can be made directly on the loop indicator via the panel keys. Configured parameters are stored in non-volatile memory, so they're retained through a loop break.
✅ 3 Year Manufacturer Warranty
Novus LoopView Datasheet Download
Novus LoopView Manual Download
Technical Details
Display: 4-digit red LED display. Indicating Range: -1999 to 9999 or 9999 to -1999
Configuration: External push buttons. Accuracy: 0.1% of span ±1 digit. Measuring Rate: 10 measurements/s
Data back-up: Non-Volatile EEPROM. Thermal coefficient: 0.005% / °C of span
Advanced Features: increasing or decreasing indication, alarm indication, parameters protection with password
Electrical Connection: EN 175301-803 A standard (DIN 43650 form A). Power Supply: 4-20mA loop powered. Max current load: 60 mA
Voltage Drop: below 10 mA <5.4V; 10-12 mA <3.9V; above 12 mA <2.8V
Operation Conditions: -40 to 85°C. Dimensions: 42.5 x 52.5 x 40.7 mm. Housing material: ABS (polyurethane gasket)
Protection Rate: IP65, NEMA4X. Certification: CE, RoHS
Frequently Asked Questions
Do I need a separate power supply?
No — LoopView is powered entirely by the 4-20mA current loop itself, so it can be retrofitted onto existing wiring with no extra wiring or power supply.
Is it compatible with our NP640 pressure transmitters?
Yes — LoopView works with the NP640 and similar 4-20mA loop-powered transducers using the same DIN 43650 connector.
What happens to my settings if the loop is interrupted?
Configured parameters are stored in non-volatile EEPROM, so they survive a loop break without needing reconfiguration.
Industry Applications
- Transducer Upgrades — adds local digital readout to existing 4-20mA sensors with no rewiring.
- Pressure & Flow Monitoring — direct compatibility with DIN 43650-connector pressure transmitters.
- Harsh Environments — IP65/NEMA4X rated for washdown or outdoor installation.