Metal Medium Lever 1CO MK1 Series Micro Switch
The MK1KIM2 steps up to a medium-length metal lever, giving a bit more reach and mechanical advantage than the short-lever MK1KIM1 while keeping the same changeover contact flexibility. It's a solid middle-ground choice when the short lever's clearance is too tight but the long lever's reach isn't needed.
10A rated for resistive loads or 6A for inductive. By choosing EMAS you can be assured of safety and quality, microswitches are UKCA and CE marked.
Changeover contact allows for normally closed or normally open wiring. Fast on crimps or soldered connection.
Technical Details
Frequently Asked Questions
Why is it rated both 6A and 10A?
6A is the standard AC15 inductive load rating; 10A applies to purely resistive loads. Check which load type your circuit switches — inductive loads (motors, solenoids) need the lower 6A figure.
Can I wire this as normally open or normally closed?
Yes — the changeover (C.O.) contact supports either wiring configuration from the same part.
Should I choose this over the short or long lever version?
The medium lever suits installations where the short lever (MK1KIM1) doesn't have enough reach, but a long lever (MK1KIM3) isn't needed. Choose based on your actuator's approach distance and available clearance.
Is this suitable for washdown areas?
It's IP20 rated, suited to standard indoor equipment rather than washdown or outdoor environments.
Industry Applications
- Machine guarding & position sensing — general-purpose detection with moderate reach
- Panel builders & OEMs — end-of-travel and interlock switching
- Appliance & equipment repair — replacement microswitch for a wide range of applications