Our Premium PID Temperature Control Kit with Bluetooth control brings your project to life with the latest PID process technology — a compact, versatile, and easily expandable controller. Perfect for packaging equipment, thermoplastics, catering equipment, brewing, and more.
Select sensor type via the dropdown box.
Contains:
1 x Novus N20K48 Controller (100-230V Supply)
1 x Novus 40A Solid State Relay
1 x PT100 Sensor (5 x 50mm, 2M cable, 420°C max) OR 1 x Type K Thermocouple (5 x 50mm, 2M cable, 800°C max)
✅ 3 year manufacturer warranty on the controller; 1 year on the included SSR and sensor
Novus N20K48 Datasheet Download
Novus N20K48 CAD Files Download
Novus N20K48 Modbus Register Download
Read The PID Bundle Wiring & Setup Guide Online
Technical Details
Controller: N20K48, Bluetooth + USB configuration, 20 ramp & soak programs of 9 segments, universal input
SSR: 40A, 40-480VAC load, 3-32VDC control
Sensor (selectable): PT100, 5 x 50mm probe, 2M cable, rated to 420°C — or Type K thermocouple, 5 x 50mm probe, 2M cable, rated to 800°C
Frequently Asked Questions
What's included in the bundle?
The N20K48 controller, a matched 40A SSR, and your choice of PT100 or Type K sensor — no separate purchases needed to get a working control setup.
What warranty applies to the bundle?
3 years on the controller and 1 year on the SSR and sensor, since they're covered under different Novus warranty terms.
Is there a 24V version of the controller?
This bundle uses the 100-230V N20K48 — contact us if you need a 12-24V bundle instead.
Do I need a heatsink for the solid state relay?
In most installations, yes. A solid state relay gives off roughly 1.5W of heat per amp of load, so a 20A heater produces around 30W in the relay. Mount it on a heatsink rated for the relay and keep the panel below 40-50°C.
How do I tune the controller after installation?
Use the built-in autotune. A fast autotune at 50-60% of your normal working temperature sets sensible PID values, then a full autotune at working temperature can fine-tune them. Run initial tuning without interference i.e. changes to setpoint or environment. For ovens and kilns, ensure doors and access points are closed. The initial tuning should be as close as possible to normal operating conditions. See PID Tuning for step-by-step help.
Can you set up the controller before it is sent?
Yes. Add our Pre-Programming service to your order and tell us your sensor, setpoint and alarm requirements. We configure the controller before dispatch, so it is ready to wire in.
Where can I find wiring and setup instructions?
Our PID Bundle Guide: Wiring & Setup covers the power supply, sensor and SSR wiring, first-time setup and autotune. You can also download the PID Bundle Guide (PDF) to keep with the panel.
Industry Applications
- Retrofit & Upgrade Projects — Bluetooth setup makes it fast to bring existing processes to current spec.
- Packaging Equipment — complete controller + SSR + sensor setup out of the box.
- Brewing & Thermoplastics — matched components for reliable heating control.
Need a custom bundle, or advice on the best products for your project? Please contact us and we will tailor a solution to your requirement.




