Rugged 4-Way Spring Return Joystick In A Die-Cast Metal Body
The EMAS CM707DJ41 is a 22mm metal-bodied joystick with four positions (up, down, left, right) that springs back to centre when released. Each axis has its own normally open contacts (2NO+2NO), so one operator can give jog or direction commands on two axes, for example hoist up/down and travel left/right, or forward/reverse on two drives. The die-cast, chromate-plated body is built for machine-mounted and harsh-environment control stations.
For enclosed panels the lower-cost plastic EMAS CP707DJ41 has the same 4-way action. Need just one axis? See the 2-position metal EMAS CM101DJ21.
MPN CM707DJ41
- 4 positions, spring return to the centre (off) position
- 2NO + 2NO contacts, one pair per axis, 4A at 230V AC (AC15)
- Die-cast metal body, corrosion-resistant chromate plating
- IP65 front of panel, standard 22mm cut-out
EMAS CM707DJ41 Datasheet Download
Technical Details
| Product | Joystick control unit |
| Type | Spring return, 4 positions |
| Contacts | 2NO+2NO |
| Mounting Diameter | 22 mm |
| Current (Ie) | 4A (230V AC) |
| Usage Category | AC15 |
| Mechanical Life | 500,000 operations (min.) |
| Electrical Life | 100,000 operations (min.) |
| Insulation Voltage (Ui) | 300V |
| Impulse Withstand Voltage (Uimp) | 2.5 kV |
| Operating Temperature | -15 / +65 °C |
| Protection Degree | IP65 |
| Contact Material | AgNi |
| Cable Section | 1.5-2.5 mm² |
| Screw Torque | 1.5 Nm |
| Short Circuit Breaking Capacity (Ics) | 1 kA |
| Standards | IEC 60947-5-1, UL 508, VDE 0660 |
| Series | CM Series Metal |
Frequently Asked Questions
How are the contacts arranged?
Each axis operates its own normally open contacts: pushing the lever one way closes one contact, the opposite direction closes the other. Releasing the lever returns it to centre and all contacts open.
Can it drive a motor directly?
No. The contacts are control-rated (4A AC15) and should switch contactor coils, relay inputs or PLC/inverter digital inputs, not the motor current itself.
Can it control a variable speed drive?
Yes. Wire the contacts to the inverter's forward/reverse or preset-speed digital inputs to jog a motor in either direction.
Metal or plastic: which should I choose?
Choose the metal CM707DJ41 for pendant stations, crane and hoist controls or exposed machines. The plastic CP707DJ41 suits enclosed control panels.
Industry Applications
- Hoists & light cranes — up/down and travel control from one lever
- Machine positioning — two-axis jog control for tables, gantries and manipulators
- Agricultural & mobile equipment — rugged direction control on exposed operator stations
Troubleshooting & Guides
- AG Inverter Drive Control — wiring switches to inverter digital inputs
- Faultfinding — tracing control circuit faults
- Knowledge Base — all our technical guides in one place