Push-In Terminal Block, PCB Connection, Grey (Onka 0382)
A hybrid terminal for wiring straight into a circuit board without soldering. One side is a pluggable PCB header; the other is a standard Onka push-fit wire terminal, so field wiring locks in without tools exactly like the rest of the OPK range. Clips directly onto TS35 DIN rail.
- PCB side: pluggable header connection, mates to a matching PCB-mount header
- Wire side: push-fit connection - accepts solid conductors or crimped ferrules, no screwdriver needed
- 2.5mm² section, rated 17.5A at 500V
- No need to solder field wiring directly to the board, and no separate ribbon/header assembly to source
Suitable for:
- 35 x 7.5mm DIN Rail (Top Hat Rail, TS35)
- 35 x 15mm DIN Rail (Top Hat Rail, TS35)
- Control panel PCBs, sensor interface boards, and other field-wired electronics needing a removable connection
- Matches Onka Part Number 0382
Technical Data
| Connection Type (PCB side) | Pluggable header |
| Connection Type (Wire side) | Push-fit |
| Mounting | TS35 DIN Rail (clip-on) |
| Colour | Grey |
| Body | PA6.6 |
| Bridge | Copper |
| Contact | CK45 Steel |
| Screw | Steel |
| Temperature | -40°C, +140°C |
| Cable Strip Length | 10mm |
| Voltage | 500V |
| Current | 17.5A |
| Section | 2.5mm² |
| Norm | EN-60947-7-1 |
| Approvals | TSE/CE/UL |
| Dimensions (mm) | |
| A | 49 |
| B | 38.5 |
| C | 34.5 |
| D | 6.75 |
Frequently Asked Questions
How is this different from a standard OPK push-fit terminal?
One side is a pluggable PCB header instead of a second wire terminal - it's designed to let you disconnect a wiring harness from the board itself, rather than terminal-to-terminal.
Do I need to solder anything?
No - the PCB side is a plug-in header connection, and the wire side is push-fit. No soldering on either side once the mating header is fitted to your board.
What size wire does the push-fit side accept?
2.5mm² solid conductors or crimped ferrules, 10mm strip length, rated 17.5A at 500V - the same push-fit action as our OPK push-fit DIN rail terminal range.
Is this DIN rail mounted?
Yes - it clips onto standard TS35 DIN rail, same as the rest of our OPK push-fit range.
Can I bridge several of these together?
Yes, using a 2.5mm cross connection bridge (available in 2, 3, 4, 10, or 20-way), cut down to the number of poles needed.
Industry Applications
- Control panel PCB interfacing - removable field wiring connection direct to a board, mounted on the same DIN rail as the rest of the panel
- Sensor & instrumentation electronics - tool-free wire termination onto interface PCBs
- OEM electronics assembly - avoids soldering field wiring, speeds up production and field service