Die-Cast Metal Emergency Stop With Integrated Label
The EMAS CM200EE is a 22mm metal-bodied emergency stop with a 40mm red turn-to-release mushroom head, a yellow legend label and one normally closed (N.C.) contact. The die-cast, chromate-plated body stands up to knocks and harsh environments far better than a plastic operator, making it the right choice for machine-mounted stations, fabrication shops and outdoor equipment where site standards call for a clearly marked stop.
Same footprint and electrical spec as the unlabelled EMAS CM200E. For a lighter-duty plastic version see the EMAS CP200EE.
MPN CM200EE
- Die-cast metal body, corrosion-resistant chromate plating
- 40mm turn-to-release red mushroom head with emergency stop label
- 1 N.C. contact rated 4A at 230V AC (AC15)
- IP65 front of panel, standard 22mm cut-out
EMAS CM200EE Datasheet Download
Technical Details
| Product | Emergency stop control unit |
| Type | Turn to release, with label |
| Contact | 1NC |
| Colour | Red |
| Mounting Diameter | 22 mm |
| Head Diameter | 40 mm |
| Current (Ie) | 4A (230V AC) |
| Usage Category | AC15 |
| Mechanical Life | 500,000 operations (min.) |
| Electrical Life | 100,000 operations (min.) |
| Insulation Voltage (Ui) | 300V |
| Impulse Withstand Voltage (Uimp) | 2.5 kV |
| Operating Temperature | -15 / +65 °C |
| Protection Degree | IP65 |
| Contact Material | AgNi |
| Cable Section | 1.5-2.5 mm² |
| Screw Torque | 1.5 Nm |
| Short Circuit Breaking Capacity (Ics) | 1 kA |
| Standards | IEC 60947-5-1, UL 508, VDE 0660 |
| Series | CM Series Metal |
Frequently Asked Questions
What is the difference between the CM200EE and the CM200E?
Both are metal 40mm turn-to-release emergency stops with one N.C. contact. The CM200EE adds an integrated emergency stop label, useful where site rules require marked stops or several stations need to be told apart.
Metal or plastic: which should I choose?
Choose the metal CM series for machine-mounted stations, heavy industry or anywhere the button may be struck or exposed. The plastic CP200EE is lighter and lower cost for enclosed control panels.
Can I add a second contact for a dual-channel safety relay?
Yes. Add an EMAS C2 normally closed contact block for the second channel, or a C1 normally open block for signalling. Contact blocks clip on behind the operator.
Is it suitable for outdoor or washdown use?
Yes. It is IP65 at the front of the panel, protected against dust and low-pressure water jets.
Industry Applications
- Machine tools & fabrication — a robust stop for presses, saws and CNC machines where the button may be struck
- Conveyors & production lines — labelled stops at each station for fast identification
- Outdoor & agricultural equipment — metal body and IP65 front for exposed control stations
Troubleshooting & Guides
- Faultfinding — tracing a stop circuit that will not reset
- Knowledge Base — all our technical guides in one place