Run a 3-phase lathe, mill or pillar drill from a 230V single-phase supply, with variable speed. This bundle pairs the Ageon AG Mini 0.75kW (1.0HP) inverter drive with a 10K speed potentiometer, so you have everything needed to control a three-phase motor of up to 0.75kW from one order. It is not for single-phase motors.
Contains:
1 x Ageon AG Mini 0.75kW inverter drive (XF2-10-1P1)
1 x EMAS MBPR10K 10K Ohm 22mm potentiometer (MB Series)
Technical Details
Drive: Ageon AG Mini XF2-10, maximum motor power 0.75kW / 1.0HP
Rated output current: 4.0 A. Maximum output current: 5.2 A. Maximum input current: 7.8 A
Supply: 200 to 240 VAC single/two-phase, 50 to 60 Hz. Output: 220 VAC three-phase, 0 to 500 Hz, V/f control
Inputs: 1 analogue input (0 to 10 V), 3 digital inputs. Modbus RTU with an RS485 adapter (sold separately)
Mounting: DIN rail or screw fixing, 66mm wide x 115mm high, IP20, 0 to 50°C
Potentiometer: EMAS MBPR10K, 10K Ohm, MB Series plastic, 22mm panel mount
Wiring Summary
Supply: 230V single-phase to the drive's L and N terminals, plus earth.
Motor: a three-phase motor (normally 230/400V) wired in delta for 230V, connected to the drive output.
Speed pot: outer terminals to the drive's 10V supply and 0V, and the centre terminal (wiper) to the 0-10V analogue input. Then set the drive's frequency reference to the analogue input.
Full step-by-step setup: AG Inverter Drive Setup guide. Always isolate before wiring; installation should be carried out by a competent person.
Frequently Asked Questions
Can this bundle run a single-phase motor?
No. The AG Mini converts a 230V single-phase supply into a variable-frequency three-phase output, so it needs a three-phase motor, normally a 230/400V motor wired in delta.
How do I wire my motor?
Most small three-phase motors are rated 230/400V. Link the motor terminals in delta for 230V and connect them to the drive output. The motor's full-load current must not exceed the drive's rated output of 4.0 A.
What size motor can I use?
Up to 0.75kW (1.0HP). Check the motor plate: the kW rating and the delta (230V) current must both be within the drive's rating.
Do I need the HMI?
No. The drive runs from the speed pot and its own keypad. If you want to set parameters from outside the cabinet, add the remote HMI or choose the Workshop Drive Bundle, which includes it.
What warranty do I get?
The Ageon AG Mini drive carries a 2-year manufacturer warranty, backed by our UK-based technical support.
Industry Applications
- Workshop machinery: lathes, mills, pillar drills and grinders converted to variable speed on a single-phase supply.
- Conveyors: smooth start and adjustable line speed for small conveyors and turntables.
- Pumps and mixers: speed control for pumps, stirrers and agitators.
Buying separately? See the AG Mini 0.75kW drive and the EMAS MBPR10K speed pot. Need help choosing? Contact us.

