Run a 3-phase lathe, mill or pillar drill from a 230V single-phase supply, with variable speed from the cabinet door. This bundle pairs the Ageon AG Mini 0.75kW (1.0HP) inverter drive with the AG Drive remote HMI, which has its own speed knob, start/stop and parameter access, so you don't need a separate speed pot. It controls a three-phase motor of up to 0.75kW and is not for single-phase motors.
Contains:
1 x Ageon AG Mini 0.75kW inverter drive (XF2-10-1P1)
1 x Ageon AG Drive remote HMI (IHM-R1) with USB Mini cable
Technical Details
Drive: Ageon AG Mini XF2-10, maximum motor power 0.75kW / 1.0HP
Rated output current: 4.0 A. Maximum output current: 5.2 A. Maximum input current: 7.8 A
Supply: 200 to 240 VAC single/two-phase, 50 to 60 Hz. Output: 220 VAC three-phase, 0 to 500 Hz, V/f control
Inputs: 1 analogue input (0 to 10 V), 3 digital inputs. Modbus RTU with an RS485 adapter (sold separately)
Mounting: DIN rail or screw fixing, 66mm wide x 115mm high, IP20, 0 to 50°C
Remote HMI: AG Drive Mini R1 model with speed knob and start/stop, USB Mini connection (cable supplied), panel cutout 56mm (W) x 61mm (H)
Wiring Summary
Supply: 230V single-phase to the drive's L and N terminals, plus earth.
Motor: a three-phase motor (normally 230/400V) wired in delta for 230V, connected to the drive output.
HMI: connect with the supplied USB Mini cable and set P701, P301 and P302 so the HMI controls speed and start/stop (see the HMI listing).
Full step-by-step setup: AG Inverter Drive Setup guide. Always isolate before wiring; installation should be carried out by a competent person.
Frequently Asked Questions
Can this bundle run a single-phase motor?
No. The AG Mini converts a 230V single-phase supply into a variable-frequency three-phase output, so it needs a three-phase motor, normally a 230/400V motor wired in delta.
Do I need a separate speed potentiometer?
No. The remote HMI has a built-in speed adjustment knob, plus start/stop and parameter access, so it replaces a separate speed pot.
How do I wire my motor?
Most small three-phase motors are rated 230/400V. Link the motor terminals in delta for 230V and connect them to the drive output. The motor's full-load current must not exceed the drive's rated output of 4.0 A.
What size motor can I use?
Up to 0.75kW (1.0HP). Check the motor plate: the kW rating and the delta (230V) current must both be within the drive's rating.
What warranty do I get?
The Ageon AG Mini drive and HMI carry a 2-year manufacturer warranty, backed by our UK-based technical support.
Industry Applications
- Workshop machinery: lathes, mills, pillar drills and grinders converted to variable speed on a single-phase supply.
- Conveyors: smooth start and adjustable line speed for small conveyors and turntables.
- Pumps and mixers: speed control for pumps, stirrers and agitators.
Buying separately? See the AG Mini 0.75kW drive and the remote HMI. Need help choosing? Contact us.


