{"product_id":"novus-digirail-oee-ethernet-lan-io-module-modbus-2ai-6di-2do-mqtt","title":"Novus DigiRail OEE Ethernet | LAN IO Module Modbus (2AI \/ 6DI \/ 2DO) MQTT","description":"\u003cp\u003eThe \u003cstrong\u003eDigiRail OEE Ethernet\u003c\/strong\u003e is economical machine monitoring for Overall Equipment Effectiveness (OEE) — hardwired I\/O to MQTT or Modbus, passing data to OEE, DCS or SCADA systems, cloud compatible, and doubling as a Modbus TCP-to-RTU or Modbus RTU-to-MQTT gateway. It utilises existing network infrastructure for data acquisition and logging over your LAN.\u003c\/p\u003e\n\u003cp\u003eThe module contains 6 digital inputs, individually configurable to monitor state (On\/Off) or act as counters, plus two analogue inputs and two digital outputs.\u003c\/p\u003e\n\u003cp\u003eInitial configuration in Novus NXperience is an extremely quick process. With a small amount of interface wiring the module can begin gathering data in minutes. This can be passed via MQTT to Novus Cloud or similar services, or sent to existing PLC\/SCADA systems using the Modbus TCP protocol.\u003c\/p\u003e\n\u003ch3\u003eModbus TCP to RTU Gateway\u003c\/h3\u003e\n\u003cp\u003eThis model can be used as a transparent gateway with no mapping of registers required. It's suitable for reading\/writing registers on RTU Slaves wired to the RS485 terminals — simply communicate via Modbus TCP and the module automatically translates commands.\u003c\/p\u003e\n\u003cp\u003eGateway Mode is a simple method allowing PLCs with Ethernet to communicate with devices such as temperature controllers, instruments and meters — a great solution for networking field devices which are only equipped with RS485 terminals.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e\u003ca href=\"\/pages\/warranty\" style=\"color: rgb(43, 0, 255);\"\u003e3 Year Manufacturer Warranty\u003c\/a\u003e\u003c\/strong\u003e — backed by our UK-based technical support\u003c\/p\u003e\n\u003ch3\u003eTechnical Details\u003c\/h3\u003e\n\u003cp\u003eInputs: 6 digital, 2 analogue. Outputs: 2 digital\u003c\/p\u003e\n\u003cp\u003eAnalogue signals: 0-5V, 0-10V, 0-20mA and 4-20mA. Digital signals: NPN, PNP and dry contact\u003c\/p\u003e\n\u003cp\u003eAnalogue input impedance: mA: 15Ω + 1.5V, V: 1MΩ\u003c\/p\u003e\n\u003cp\u003eDigital input: Logical \"0\" \u0026lt;0.5V, Logical \"1\" \u0026gt;3V, max voltage 30V, input impedance 270kΩ, input current @30Vdc typical 0.15mA\u003c\/p\u003e\n\u003cp\u003eMax frequency (square wave): dry contact 10Hz, PNP\/NPN 3kHz. Min pulse duration: dry contact 50ms, PNP\/NPN 150μs\u003c\/p\u003e\n\u003cp\u003eDigital outputs: 2 NPN, max switching current 700mA\u003c\/p\u003e\n\u003cp\u003eAnalogue channel resolution: 15 bits (32000 levels)\u003c\/p\u003e\n\u003cp\u003eCommunication interface: USB, Ethernet 10\/100 Mb\/s (IEEE 802.3u), RS485\u003c\/p\u003e\n\u003cp\u003eSoftware: NXperience\u003c\/p\u003e\n\u003cp\u003ePower supply: 10-36 Vdc. Typical consumption 50mA @24V, max 120mA @12V\u003c\/p\u003e\n\u003cp\u003eOperating conditions: -20 to 60°C, 5-95% RH non-condensing\u003c\/p\u003e\n\u003cp\u003eBattery: CR2032 for internal clock retention. Mounting: DIN rail or screw. Protection: IP20. Enclosure: ABS+PC\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCan this connect existing RS485 devices to an Ethernet network?\u003c\/strong\u003e\u003cbr\u003eYes — as a transparent Modbus TCP to RTU gateway, it lets Ethernet-equipped PLCs communicate with RS485-only field devices with no register mapping required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow quickly can I get it collecting data?\u003c\/strong\u003e\u003cbr\u003eInitial configuration in Novus NXperience is fast — with minimal interface wiring the module can begin gathering data within minutes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs there a WiFi version?\u003c\/strong\u003e\u003cbr\u003eYes — see our DigiRail OEE WiFi model if you need wireless rather than wired Ethernet connectivity.\u003c\/p\u003e\n\u003ch3\u003eIndustry Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEE \u0026amp; Machine Monitoring\u003c\/strong\u003e — tracks run state and counts for equipment effectiveness reporting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegacy Device Integration\u003c\/strong\u003e — bridges RS485-only field devices onto an Ethernet\/Modbus TCP network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloud \u0026amp; MQTT Data Logging\u003c\/strong\u003e — passes hardwired I\/O data to Novus Cloud or similar IoT platforms.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Novus","offers":[{"title":"Default Title","offer_id":38032226615466,"sku":"8811814420","price":96.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/products\/t2-digirail_oee_02_semtampa_80e186b0-0ed1-44ed-bf81-aa74f9632542.png?v=1613290700","url":"https:\/\/www.production-automation.co.uk\/products\/novus-digirail-oee-ethernet-lan-io-module-modbus-2ai-6di-2do-mqtt","provider":"Production Automation","version":"1.0","type":"link"}