{"product_id":"novus-digirail-connect-ramix-ethernet-io-module-2ai-2ao-4di-3do","title":"Novus DigiRail Connect RAMIX | Ethernet IO Module Modbus TCP\/RTU (2AI \/ 2AO \/ 4DI \/ 3DO)","description":"\u003cp\u003eThe \u003cstrong\u003eNovus DigiRail Connect RAMIX 2AI \/ 2AO \/ 4DI \/ 3DO\u003c\/strong\u003e (8811611420) combines 2 isolated universal analogue inputs, 2 isolated analogue outputs, 4 digital inputs and 3 PNP digital outputs in one DIN rail module. The analogue inputs read thermocouples, Pt100\/Pt1000, NTC and mV, V or mA signals directly at 16-bit resolution, so sensors wire straight in without separate transmitters. The outputs provide 0-20mA, 4-20mA or 0-10V for drives, valves and displays.\u003c\/p\u003e\n\u003cp\u003eEvery DigiRail Connect model has Ethernet, RS485 and Micro USB on board. It works as a Modbus RTU slave on an existing RS485 network or as a Modbus TCP server on Ethernet, and can act as a transparent Modbus TCP to RTU gateway, so an Ethernet PLC or SCADA system can read RS485 instruments wired to its terminals with no register mapping. Configuration and I\/O testing use free Novus NXperience software over USB.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLead time:\u003c\/strong\u003e made to order by Novus, typically 1–2 weeks to dispatch.\u003c\/p\u003e\n\u003ch3\u003eDigiRail Connect Range\u003c\/h3\u003e\n\u003cp\u003eAll four DigiRail Connect models share the same Ethernet\/RS485 hardware and software. Choose by the I\/O mix you need:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.production-automation.co.uk\/products\/novus-digirail-connect-dmix-ethernet-io-module-8di-8do\" style=\"color: #0000ff; font-weight:bold;\"\u003eDMIX 8DI \/ 8DO (8811612420)\u003c\/a\u003e\u003c\/strong\u003e — 8 digital inputs, 8 PNP transistor outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.production-automation.co.uk\/products\/novus-digirail-connect-dmix-ethernet-io-module-8di-4-relay\" style=\"color: #0000ff; font-weight:bold;\"\u003eDMIX 8DI \/ 4 Relay (8811612440)\u003c\/a\u003e\u003c\/strong\u003e — 8 digital inputs, 4 relay outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRAMIX 2AI \/ 2AO \/ 4DI \/ 3DO (8811611420)\u003c\/strong\u003e — this model: 2 universal analogue inputs, 2 analogue outputs, 4 digital inputs, 3 PNP outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.production-automation.co.uk\/products\/novus-digirail-connect-ramix-ethernet-io-module-2ai-2ao-4di-2-relay\" style=\"color: #0000ff; font-weight:bold;\"\u003eRAMIX 2AI \/ 2AO \/ 4DI \/ 2 Relay (8811611440)\u003c\/a\u003e\u003c\/strong\u003e — as this model but with 2 relay outputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnly need analogue inputs on RS485? The lower-cost \u003cstrong\u003e\u003ca href=\"https:\/\/www.production-automation.co.uk\/products\/novus-digirail-2a-analogue-input-module-modbus-rs485\" style=\"color: #0000ff; font-weight:bold;\"\u003eNovus DigiRail-2A\u003c\/a\u003e\u003c\/strong\u003e converts two thermocouple, Pt100, mV, V or mA signals to Modbus RTU.\u003c\/p\u003e\n\u003cp\u003e✅ \u003cstrong\u003e\u003ca href=\"\/fr\/pages\/warranty\" style=\"color: #0000ff; font-weight:bold;\"\u003e3 Year Manufacturer Warranty\u003c\/a\u003e\u003c\/strong\u003e — backed by our UK-based technical support\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/files\/PDF_32_480x480.png?v=1644302486\" alt=\"PDF\" width=\"32\" height=\"32\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/files\/ethernet_io_module_digirailconnect_20191010_fl_en.pdf?v=1707947248\" title=\"Novus DigiRail Connect Datasheet Download\" style=\"color: #0000ff; font-weight:bold;\"\u003eNovus DigiRail Connect Datasheet Download\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/files\/PDF_32_480x480.png?v=1644302486\" alt=\"PDF\" width=\"32\" height=\"32\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/files\/manual_digirail_connect_v10x_h_en.pdf?v=1707946946\" title=\"Novus DigiRail Connect Manual Download\" style=\"color: #0000ff; font-weight:bold;\"\u003eNovus DigiRail Connect Manual Download\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eTechnical Details\u003c\/h3\u003e\n\u003cp\u003eOrder code: 8811611420 (DigiRail Connect RAMIX 2AI \/ 2AO \/ 4DI \/ 3DO ETH)\u003c\/p\u003e\n\u003cp\u003eAnalogue inputs: 2, isolated, universal: thermocouple J, K, T, N, E, R, S, B; Pt100, Pt1000, NTC; 0-60mV, 0-5V, 0-10V, 0-20mA, 4-20mA. 16-bit resolution\u003c\/p\u003e\n\u003cp\u003eAnalogue outputs: 2, isolated, 0-20mA, 4-20mA or 0-10V. 12-bit resolution\u003c\/p\u003e\n\u003cp\u003eDigital inputs: 4, PNP, NPN or dry contact, configurable counter function\u003c\/p\u003e\n\u003cp\u003eDigital outputs: 3, PNP transistor, 200mA max load per output, 6-30 Vdc switching\u003c\/p\u003e\n\u003cp\u003eCommunication: Ethernet 10\/100 Mb\/s (IEEE 802.3u), RS485, Micro USB\u003c\/p\u003e\n\u003cp\u003eProtocols: Modbus TCP server, Modbus RTU slave, transparent Modbus TCP to RTU gateway\u003c\/p\u003e\n\u003cp\u003eConfiguration software: Novus NXperience (free, via USB)\u003c\/p\u003e\n\u003cp\u003ePower supply: 10-36 Vdc, 5W max (20mA typical)\u003c\/p\u003e\n\u003cp\u003eOperating conditions: -20 to 60°C, 5-95% RH non-condensing\u003c\/p\u003e\n\u003cp\u003eEnclosure: ABS+PC, 35mm DIN rail mounting\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat can the analogue inputs read directly?\u003c\/strong\u003e\u003cbr\u003eThermocouples (J, K, T, N, E, R, S, B), Pt100, Pt1000 and NTC sensors, plus 0-60mV, 0-5V, 0-10V, 0-20mA and 4-20mA signals. Each channel is configured independently in NXperience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need RAMIX or DMIX?\u003c\/strong\u003e\u003cbr\u003eChoose RAMIX when you need analogue measurement or an analogue output. DMIX models suit applications where every signal is on\/off and you need more discrete channels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShould I choose this 3DO model or the 2 Relay RAMIX?\u003c\/strong\u003e\u003cbr\u003eThis model has 3 PNP transistor outputs (up to 200mA) for PLC-level DC signals and pulsing. The 2 Relay version gives volt-free contacts for switching AC loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it provide a speed reference to an inverter?\u003c\/strong\u003e\u003cbr\u003eYes. The 0-10V or 4-20mA analogue outputs can set inverter speed, valve position or a remote display, driven from SCADA or a PLC over Modbus.\u003c\/p\u003e\n\u003ch3\u003eIndustry Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess monitoring\u003c\/strong\u003e — brings temperatures, pressures and flows into SCADA without separate transmitters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote analogue control\u003c\/strong\u003e — sends speed references to inverter drives and positions proportional valves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy \u0026amp; utilities\u003c\/strong\u003e — data acquisition in pump stations and plant rooms over Ethernet or RS485.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What can the analogue inputs read directly?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Thermocouples (J, K, T, N, E, R, S, B), Pt100, Pt1000 and NTC sensors, plus 0-60mV, 0-5V, 0-10V, 0-20mA and 4-20mA signals. Each channel is configured independently in NXperience.\"}},{\"@type\":\"Question\",\"name\":\"Do I need RAMIX or DMIX?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Choose RAMIX when you need analogue measurement or an analogue output. DMIX models suit applications where every signal is on\/off and you need more discrete channels.\"}},{\"@type\":\"Question\",\"name\":\"Should I choose this 3DO model or the 2 Relay RAMIX?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"This model has 3 PNP transistor outputs (up to 200mA) for PLC-level DC signals and pulsing. The 2 Relay version gives volt-free contacts for switching AC loads.\"}},{\"@type\":\"Question\",\"name\":\"Can it provide a speed reference to an inverter?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The 0-10V or 4-20mA analogue outputs can set inverter speed, valve position or a remote display, driven from SCADA or a PLC over Modbus.\"}}]}\n\u003c\/script\u003e","brand":"Novus","offers":[{"title":"Default Title","offer_id":57641769337205,"sku":"8811611420","price":230.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0501\/5794\/5002\/products\/t2-modulo_io_ethernet_digirail_connect_ramix_02.jpg?v=1679813268","url":"https:\/\/www.production-automation.co.uk\/fr\/products\/novus-digirail-connect-ramix-ethernet-io-module-2ai-2ao-4di-3do","provider":"Production Automation","version":"1.0","type":"link"}